Page 18
MAINTENANCE MODE
Maintenance Mode allows access to service and diagnostic information, as well as provides the ability to adjust
certain program default parameters. To enter Maintenance Mode:
1.
Within 15 seconds of waking the console, tap the
,
and
buttons to enter Maintenance Mode.
2.
While in MAINTENANCE MODE pressing the
or
button navigates between screens:
•
Screen 1:
Displays cumulative hours and distance, Software version
•
Screen 2:
TIMEOUT, default 30 seconds. Tap the
button to adjust.
•
Screen 3:
SUMMARY MODE Time, default 15 seconds. Tap the
button to adjust.
•
Screen 4:
Select Machine Type. Tap the
button to toggle through options:
P1
TREAD (HIITMILL)
P2
BIC1 (HIITBike & Airfit)
P3
ERGO (HIIT UBE)
P4
STEP
P5
BIC 2 (Airfit Gen 1)
P6
ROW (HIIT Rower)
P7-9
NONE
•
Screen 5:
UNITS - Tap the
button to change units.
•
Screen 6:
ANT+ - Tap the
button to turn ANT+ on or off.
•
Screen 7:
HIITMILL CALIBRATION
HIITMILL Only:
PRESS RESISTANCE LEVER TO THE FORWARD MOST POSITION
PRESS TIME BUTTON TO SET ANGLE TO ZERO
•
Screen 8:
SOFTWARE UPDATE
INSERT USB DRIVE LOADED WITH SOFTWARE INTO SLOT ON RIGHT SIDE OF CONSOLE
PRESS CALORIE BUTTON
WAIT FOR COUNT UP
REMOVE USB
3.
Press the
button to exit MAINTENANCE MODE at any time.
