3
Click on the
Update
icon when available on the bottom left side of the screen (if the Update button does not appear, go back to the
previous screen and enter the Retrieve Live Status “Globe” again)
In the popup menu, select the latest firmware version at the top
Check the box for
Auto Activate
and click
Update
Stay on this screen to perform the next step
Step 6 — Login to the Côr Panel
Click on the
Remote Control
tab on the left side of the screen
Sign in as an installer
Username:
installer
(lower case)
Password:
9713
Click on
Settings
from the menu items
NOTE
: The Côr panel will automatically power cycle once the firmware download is completed and you may need to login again while
performing the setup process below.
Step 7 — Learn the TX
−
E201 Door Window Sensors to the Côr panel
Go to
Settings
and select
Sensors
from the dropdown menu under Settings Selector
Select
Sensor
to Configure
for the next available slot i.e. “1 Sensor”
Click on the
Learn
button
Pick up one of the TX
−
E201 Door Window Sensor main body with the inserted battery and press the exposed black tamper button
A message will appear that a New Device Found
Enter a description under Sensor Name
Select the appropriate Sensor Type i.e. “3 Entry Exit Delay 1”
Select “1 Bypass” for Sensor Option
“Tamper” should be defaulted as checked