SEE YOUR HOME IN A
WHOLE NEW WAY.
CÔR™ OUTDOOR WI-FI
®
CAMERA
1080P FULL HD
QUICK-START GUIDE
ADDITIONAL SUPPORT
Questions/Comments?
We want to hear from you!
Call us: 844-692-6746 or
(844) MY-COR-HOME
Visit
mycorhome.com.
i
Make sure the microSD card slot is facing downward
for waterproof performance when you adjust the
camera surveillance angle.
1
1
2
Connecting cables
Connect the power cable and network cable.
The camera should already be set up in your
Côr
™
Smart Home account if you completed setup.
If the camera was connected to a Wi-Fi
®
network before, it will automatically connect to
the same network.
Adjusting the surveillance angle
Loosen the adjusting screw and adjusting knob.
Adjust the surveillance angle to your desired place.
Tighten the adjusting screw and adjusting knob
to secure position.
A
B
microSD
Card Slot
Adjusting Screw
Adjusting Knob
microSD Card Slot
For microSD card (not included with this product).
Recommended compatibility: Class 10, maximum
space 128GB.
RESET
Hold down the RESET button for 10 seconds when
the camera is running. The camera will restart and
reset all camera settings to default.
Network Interface
10M/100M Self-adaptive Ethernet Interface supports
the PoE (Power of Ethernet) additionally.
Power Supply
1A 12V
Adjusting Screw
Adjusting Knob
RESET
microSD
Card Slot
Power
Input
Network
Interface
–––
Côr Smart Home app reads “The camera is offline” or
“The device is not registered” when camera is added.
Make sure your router is connected to the Internet
and you have a good Wi-Fi
®
signal.
The mobile device cannot receive notification
prompts when the camera is online.
Make sure the Côr Smart Home app is running on
your mobile device, Motion Detection is enabled and
Notifications are turned on.
Android users should make sure the app is running
in the background.
iOS users should enable the message push function
in “Settings > Notification.”
If alarm prompts still fail to appear, hold down the RESET
button for 10 seconds to restore the camera settings to
factory default. (Note: you will need to set up Wi-Fi again.)
Live view or playback failed.
Make sure your network is well-connected. Viewing live
video needs a good bandwidth. You can refresh the video
or change network and try again.
How to connect to a new Wi-Fi network.
Hold down the RESET button on the camera for
10 seconds to reset and restart the camera.
Reconnect the Wi-Fi by following the in-app steps.
Q
Q
Q
Q
A
A
A
A
TROUBLESHOOTING
©2018 Côr™ Home Automation.
Wi-Fi
® is a registered trademark of the Wi-Fi Alliance Corporation.
Apple and the Apple logo are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store is a service
mark of Apple Inc. Google Play is a trademark of Google Inc.
Android is a trademark of Google Inc. Other trademarks and logos
mentioned are the properties of their respective owners.
CTSTO-WH
IM-CTSTO-WH-01
