Copystar MFD-12, User Manual

Page: 13 / 21

11

[
٭
] – Copy enabled (default).
DISK , BRIEF or RESIZE modes will perform a Copy operation.
 [ ] – Copy disabled.
FULL, BRIEF or RESIZE modes will not perform a Copy
operation.
Note: To perform a Copy & Compare operation, set both the SET COPY
and SET COMPARE options.
9.5 SET COMPARE
The SET COMPARE option allows you to enable or disable the Compare
operation.
Tap
the ‘ENT’ button to change this option’s setting.
 [ ] – Compare disabled (default).
FULL, BRIEF or RESIZE modes will not perform a Compare operation.
 [
٭
] – Compare enabled.
FULL, BRIEF or RESIZE modes will perform a Compare operation.
Note: To perform a Copy & Compare operation, set both the SET COPY
and SET COMPARE options.
9.6 SET QUICK ERASE
Simply erase all the data on the hard drive.
9.7 BRIEF IMMEDIATE
BRIEF IMMEDIATE is used to change the analytical method in Brief mode.

The analyze source and copy work with the same time in Brief mode.

The duplicator analyzes the source first; and then starts to copy data into the
Targets.
 The default value is Disable.
For some source drives, it will take a very long time to analyze it, so enable
BRIEF IMMEDIATE is able to save more time during Brief copy.