Copystar MFD-12, User Manual

Page: 10 / 21

8
8. MAIN FUNCTION
8.1 BRIEF COPY
BRIEF mode copies only the sectors that contain data and skips any blank
sectors. This mode is the fastest copy mode; it support the following system Win
8, Win 7, Win Vista, Win 2000/98/95, MAC 10.X, Ubuntu, Fedora, Red Hat,
FAT12/16/21/64, exFAT, NTFS, HFS, HPFS, EXT 1/2/3/4, XFS, GPT, LVM,
UFS, HPA. RIEF
8.2 RESIZE COPY
RESIZE mode is used to copy between Source and Target drives of different
capacities. The Resize mode allows for copying from a smaller capacity Source
to larger capacity Target drives. Resize copy supports the following file systems:
FAT, FAT32, NTFS. If the Source is not formatted as a supported file system
then the duplicator will automatically switch to FULL mode. When duplicating
in Resize mode, Target drives should all be the same capacity.
8.3 DISK COPY
DISK Copy mode copied drives sector by sector from the Source to the Targets,
and support all major OS formats and unknown file system. This DISK Copy
mode will take more time than the other copy mode; this is because it will copy
the whole sectors of the Flash. The time will be increased base on the drive’s
capacity.
8.4 VERIFY
VERIFY will check all connected flash drives and determine if they are readable.
The verification operation will check any flash drive connected to a Target port
and verifies that all sectors on the Flash are readable.