Copystar CS 181, Service Manual

Page: 83 / 355

2KJ/2KH
1-3-43
U243
Checking the operation of the DP motors
Description
Turns the motors and solenoids in the DP on.
Purpose
To check the operation of the DP motors or solenoids.
Method
1. Press the start key.
2. Select the item to be operated using the cursor up/down keys.
3. Press the start key. The operation starts.
4. To stop operation, press the stop/clear key.
Completion
Press the stop/clear key when operation stops. The screen for selecting a maintenance item No. is displayed.
U244
Checking the DP switches
Description
Displays the status of the respective switches in the DP.
Purpose
To check if respective switches in the DP operate correctly.
Method
1. Press the start key.
2. Turn the respective switches on and off manually to check the status.
When a switch is detected to be in the ON position, the display for that switch will be highlighted.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Motors and solenoids
F MOT Original feed motor (OFM) is turned on.
C MOT Original conveying motor (OCM) is turned on.
R MOT Original switchback motor (OSBM) is turned on.
RJ SL Switchback feedshift solenoid (SBFSSOL) is turned on.
RP SL Switchback pressure solenoid (SBPSOL) is turned on.
Display Switches
SET SW Original set switch (OSSW)
TMG SW DP timing switch (DPTSW)
MAT SW DP open/close switch (DPOCSW)
COV SW DP interlock switch (DPILSW)
REV SW Original switchback switch (OSBSW)
SZ A SW Original size length switch (OSLSW)