Copystar CS 181, Service Manual

Page: 45 / 355

2KJ/2KH
1-3-5
(3) Contents of the maintenance mode items
Maintenance
item No.
Description
U000
Outputting an own-status report
Description
Prints out a list of the current settings of all maintenance items, and occurrences of paper jams and service
calls.
Purpose
To check the current setting of the maintenance items, or the occurrences of paper jams and service calls.
Before initializing or replacing the backup RAM, print out a list of the current settings of the maintenance items
so that you can reenter the same settings after initialization or replacement.
Method
1. Press the start key.
2. Select the item to be output.
3. Press the start key. The interrupt copy mode is entered and a list is output.
When A4/Letter paper is available, a report of this size is output. If not, specify the paper feed location.
When output is complete, the screen for selecting an item is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U001
Exiting the maintenance mode
Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
Press the start key. The normal copy mode is entered.
U002
Setting the factory default data
Description
Restores the machine conditions to the factory default settings.
Purpose
To move the mirror frame of the scanner to the position for transport (position in which the frame can be fixed).
Method
1. Press the start key.
2. Select the [EXECUTE] using the cursor up/down keys.
3. Press the start key.
The mirror frame of the scanner returns to the position for transport.
4. Turn the main power switch off and on.
Display Output list
MAINTENANCE List of the current settings of the maintenance modes
JAM List of the paper jam occurrences
SERVICE CALL List of the service call occurrences