Copystar CS 181, Service Manual

Page: 32 / 355

2KJ/2KH
1-2-12
1-2-3 Installing the key counter (option)
Installing the key counter requires the following component:
Key counter (P/N 3025418011)
Key counter set (P/N 302A369708)
Key counter wire set (P/N )
Key counter mounting plate (P/N 2C960100)
Supplied parts of key counter set:
Key counter socket assembly (P/N 3029236241)
Key counter cover (P/N 3066060011)
Key counter mount (P/N 3066060041)
Key counter retainer (P/N 302GR03020)
Key counter cover retainer (P/N 302GR03010)
Two (2) Edgings (P/N 7YZ+H01)
One (1) Band (P/N M21AH010)
One (1) M3
×
8 tap-tight P screw (P/N 5MBTP+R)
Two (2) M4
×
10 tap-tight P screws (P/N 5MBTP+R)
Two (2) M4
×
10 tap-tight S screws (P/N 5MBTP+R)
Two (2) M3
×
6 bronze flat-head screws (P/N 7BB003306H)
One (1) M4
×
20 tap-tight S screw (P/N 7BB100420H)
One (1) M3 bronze nut (P/N 7BC+H01)
One (1) M3
×
8 bronze binding screw (P/N B1B03080)
One (1) M4
×
30 tap-tight S screw (P/N B1B54300)
Five (5) M4
×
6 chrome TP screws (P/N B4A04060)
Two (2) M4
×
10 chrome TP screws (P/N B4A04100)
Supplied parts of key counter wire set:
Key counter wire (P/N 302KK46300)
Two (2) Wire saddles (P/N )
One (1) Edging (P/N )
Procedure
1. Press the power key on the operation panel
to off. Make sure that the Power lamp is off
before turning off the main power switch.
And then unplug the power cable from the
wall outlet.
2. Fit the key counter socket assembly to the
key counter retainer using two screws and
nut.
3. Fit the key counter mount to the key counter
cover using two screws.
4. Fit the key counter retainer to the key
counter mount using two screws.
Figure 1-2-14
M3 x 6 flat-head
screws
(7BB003306H)
Key counter
mount
(3066060041)
Key counter cover
(3066060011)
M4 x 6 screw
(B4A04060)
M4 x 6 screw
(B4A04060)
Key counter
socket assembly
(3029236241)
M4 x 6 screw
(B4A04060)
M3 nut
(7BC+H01)
Key counter retainer
(302GR03020)
M4 x 6 screw
(B4A04060)