Revision 01
March 31, 1998
150-412-181-01
14
PairGain Engineering - Plant Series
HRU-412 List 8A
I
NSTALLATION
This section describes how to install the HRU-412 List 8A.
Unpack and Inspect the Shipment
Upon receipt of the equipment:
1
Unpack the container and visually inspect the product for signs of
damage. If the equipment has been damaged in transit, immediately
report the extent of the damage to the transportation company and to your
sales representative.
2
Verify the contents using the packing list to ensure complete and
accurate shipment.
If you must store the equipment for a prolonged period, store it in the
original container.
Install the HRU-412 List 8A
The HRU-412 List 8A mounts in the following shelves (indoor use):
•
PairGain’s HRE-421 (double-width, single-mount)
•
HRE-422 (double-wide, double mount)
•
HRE-424 (double-wide, four-unit wall mount)
•
HRE-420 (single-wide, single mount)
•
HRE-427 (seven-unit wall or rack mount)
•
HRE-425 (12 slot wall or rack mount)
For outdoor applications, the HRU-412 List 8A mounts in the following
shelves:
•
HRE-454 (four-unit)
•
HRE-450 (single-unit)
•
400 Mechanics type shelves
The HRU-412 List 8A pin-outs are shown in Figure 4. The active pins are
shown in black.
Summary of Contents for 150-1103-81
Page 41: ......
