Copper Mountain Technologies PLANAR TR1300/1, Programming Manual

Page: 195 / 329

COM Server Commands
195
SCPI.SENSe( Ch ).CORRection.COLLect.CKIT.SELect
Object Type Property (read/write)
Data Type Long
Target
Channel Ch ,
Ch channel number 1–9 (see
Table 1
)
Description The selected calibration kit for the channel.
Range from 1 to 16
Out of Range An error occurs. Error code: 222.
Preset Value 1
Syntax
Dim Value As Long
Value =
app.SCPI.SENSe(Ch).CORRection.COLLect.CKIT.SELect
app.SCPI.SENSe(Ch).CORRection.COLLect.CKIT.SELect =
3
Equivalent
Softkeys
Calibration > Cal Kit > Cal Kit n
Table 8. Std : Calibration Standard Number
Data Type Long
Description The number of the standard.
Range Varies depending on the number of the standards in the calibration kit.
Out of Range
If the specified standard number is greater than the number of
standards in the kit, an error occurs.
Notes If the standard number is not specified, it is taken as equal to 1.