Copley Controls Corp.
iii
A
BOUT
T
HIS
G
UIDE
Overview and Scope
This guide describes the selection, installation, and configuration of external regen resistors for
Xenus Amplifiers.
Related Documentation
Users of the CANopen features should also read these Copley Controls documents:
•
Xenus User Guide
•
Using CME 2 with Xenus
Information on Copley Controls Software can be found at:
http://www.copleycontrols.com/motion/software
Comments
Copley Controls Corporation welcomes your comments on this guide. See
for contact information.
Copyrights
No part of this document may be reproduced in any form or by any means, electronic or
mechanical, including photocopying, without express written permission of Copley Controls
Corporation.
Xenus and CME 2 are registered trademarks of Copley Controls Corporation.
Document Validity
We reserve the right to modify our products. The information in this document is subject to change
without notice and does not represent a commitment by Copley Controls Corporation. Copley
Controls Corporation assumes no responsibility for any errors that may appear in this document.