Qty
Ref
DeScRIPtIon
ManufactuReRS PaRt nuMbeR
XeL-cK
Connector kit
with
Solder Cup
Connectors
for
J5, J8, J9 & J10
1
J1
Plug, 4 position, 7.5 mm, female
Wago: 721-204/026-045 (note 1)
1
J2
Plug, 4 position, 5.0 mm, female
Wago: 721-104/026-047 (note 1)
1
J3
Plug, 5 position, 5.0 mm, male
Wago: 721-605/000-044 (note 1)
1
J4
Plug, 3 position, 5.0 mm, female
Wago: 721-103/026-047 (note 1)
4
J1~4 Tool, wire insertion & extraction (for J1~4)
Wago: 231-131
1
J5
Connector, D-Sub, 9-position, male, solder cup
norcomp: 171-009-103L001
1
Backshell, D-Sub, RoHS, metallized, for above
norcomp: 979-009-020R121
1
J8
Connector, high-density D-Sub, 26 position, female, solder cup
norcomp: 180-026-203L001
1
Backshell, D-Sub, RoHS, metallized, for above
norcomp: 979-015-020R121
1
J9
Connector, high-density D-Sub, 15 position, male, solder cup
norcomp: 180-015-103L001
1
Backshell, D-Sub, RoHS, metallized, for above
norcomp: 979-009-020R121
1
J10
Connector, high-density D-Sub, 26 position, male, solder cup
norcomp: 180-026-103L001
1
Backshell, D-Sub, RoHS, metallized, for above
norcomp: 979-015-020R121
CME 2
J5
CME 2 Drive Configuration Software (CD-ROM)
SER-Ck
RS-232 Cable kit
XEL-nC-10
1
n/a
EtherCAT network cable, 10 ft (3 m)
XEL-nC-01
1
n/a
EtherCAT network cable, 1 ft (0.3 m)
note 1: For RoHS compliance, append “/Rn01-0000” to the part numbers listed above
Heatsink kits for Field installation (optional)
XEL-HL
Heatsink kit
Low-Profile
1
Heatsink, low-profile
1
Heatsink thermal material
4
Heatsink hardware
XEL-HS
Heatsink kit
Standard
1
Heatsink, standard
1
Heatsink thermal material
4
Heatsink hardware
Regeneration Resistors (optional)
XTL-RA-03
Regeneration resistor assembly (for XEL-230-18), 30
Ω
XTL-RA-04
Regeneration resistor assembly (for XEL-230-36 & XEL-230-40 models), 15
Ω
Edge Filter (optional)
XTL-FA-01
Edge filter
Edge Filter
Connector kit
XTL-Fk
1
Plug, 4 position, 5.0 mm, female
Wago: 51118008 or 721-104/026-047/Rn01-
0000
1
Plug, 5 position, 5.0 mm, male
Wago: 51111277 or 721-605/000-044/Rn01-
0000
2
Tool, wire insertion & extraction
Wago: 231-131
ORDERING GUIDE
XEL-230-18
Xenus Plus EtherCAT Servo Drive 6/18 Adc
XEL-230-36
Xenus Plus EtherCAT Servo Drive 12/36 Adc
XEL-230-40
Xenus Plus EtherCAT Servo Drive 20/40 Adc
Copley Controls, 20 Dan Road, Canton, MA 02021, USA
Tel: 781-828-8090
Fax: 781-828-6547
Tech Support: E-mail: [email protected], Web:
Page 28 of 28
Xenus
Plus
EtherCAT
RoHS
XEL
Example: order one Xenus Plus drive, resolver version, 6/18 A with solder-cup connector kit, CME 2
CD, serial cable kit and small heatsink fitted at the factory:
Qty item
Remarks
1 XEL-230-18-R-HS Xenus Plus servo drive
1
XEL-Ck
Connector kit
1
CME 2
CME 2 CD
1
SER-Ck
Serial Cable kit
Note: The heatsink can be fitted at the factory by adding an “-HS” or “-HL” to the drive part number to specify the standard or low-profile type. For fitting a
heatsink to an drive in the field, complete kits are available (XEL-HS and XEL-HL). These kits contain the heatsink, mounting hardware, and dry-film interface.
Rev 18.03-mo
04/13/2015
Note: Specifications are subject to change without notice
ACCESSoRiES
Add “-R” to model number for resolver option
EtherCAT is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.