Accelnet & Stepnet Plus Panels User Guide
16-01339 Rev 07
5.8 S
AFE
T
ORQUE
O
FF
The information provided in the
Accelnet
&
Stepnet
Plus Panels STO
Manual
must be considered for any application using the STO feature.
Failure to heed this warning can cause equipment damage,
injury, or death
STO
C
ONNECTOR
L
OCATIONS
BEL, BPL, BML,TEL,
BE2, BP2, TE2, TP2
D
RIVE
R
ECEPTACLE
Description
Dsub DE-09F, 9-position female receptacle, #4-40 jack screws
C
ABLE
C
ONNECTOR
Description
Manufacturer & PN
Connector, Dsub DE-09F, poke-crimp, with locking tab
AMP/Tyco: 205204-4
AMPLIMITE HDP-20, Crimp-Snap contacts, 24~20 AWG, sel AU/NI
AMP/Tyco: 66506-9
Backshell, D-Sub, RoHS, metallized, #4-40 locking screws
Norcomp: 979-009-020R121
C
ONNECTOR
T
OOLS
Note: Th1s part is shown here for convenience. It is not included in connector kits,
and is not sold by Copley Controls.
Description
Manufacturer & PN
Insertion/extraction tool for HDP-20 contacts
AMP/Tyco 91067-2
P
IN
D
ESCRIPTION
Pin
Signal
Function
1
Frame Gnd
Cable shield connection
2
STO-IN1(+)
High Side of IN1
3
STO-IN1(-)
Low Side of IN1
4
STO-IN2(+)
High Side of IN2
5
STO-IN2(-)
Low Side of IN2
6
STO-IN1(+)
High Side of IN1
7
STO-IN1(-)
Low Side of IN1
8
STO-Bypass
Internal current source for STO bypassing
9
STO-Gnd
STO ground, for bypass current
!