manualshive.com logo in svg

Copernicus King Royal RC146, Assembly Manual, Page: 1 / 17

Share
Download
Copernicus King Royal RC146 Assembly Manual Download Page 1

Chart Loop Hook (2)

This assembly guide provides instructions to build the King Royal Reading Writing Center.
Check out our full line of products at www.copernicused.com 

King Royal Reading Writing Center

 - 

Assembly Guide

RC146

1-800-267-8494    

or      email [email protected]

Have your packing slip ready for reference

If parts are missing or you require assistance, 
please call:

RC146_2009_D

Please Recycle

This product is meant to be assembled by an Adult.  
In its unassembled state, small parts present a hazard. 
This product to be used under the direct supervision of an adult.

WARNING

c

Front Frame (1)

Safety Cap
Bookledge (1)

Base (2)

Caster (4)

Upper Frame (2)

Lower Frame (2)

Open Tub (5)

Back Tub Bar (1)

Center Frame (1)

Stretcher (2)

Front Frame Support (2)

Shelf (1)

Life

Warranty

Time

Tub

Life

Warranty

Time

Frame

Front Tub Bar (1)

Tub Channel (2)

Small Tub (1)

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc. 

Summary of Contents for King Royal RC146


















Reviews:

No comments