Instructions for Sarah Fixed Top Tables
Tools required
Lay the
Table Top
face down on a soft
level surface. Slide a washer and a nut
over each bolt and hand tighten. Then
use the wrench to tighten the nuts
securely (
Figure 1
). Repeat this to
attach the other legs. Then place the
table in its upright position.
Step 1:
Install the table legs
7/16” wrench
1
Figure 1
.
Install Table legs
Table top
Unpack the table
onto a soft level
surface and identify
the listed items.
Sarah Fixed Top Dining Tables:
36” x 60” Table, 6-SAR-03-xx
36” x 36” Table, 6-SAR-01-xx
36” x 48” Table, 6-SAR-02-xx
Table leg
Components included:
Table top (1)
Hardware included:
#20 x ¼” nuts (8)
Washers (8)
Legs (4)
Nuts and
washers
Wrench
36” x 78” Table, 6-SAR-04-xx
40” x 40” Table, 6-SAR-05-xx
40” x 60” Table, 6-SAR-06-xx
40” x 78” Table, 6-SAR-10-xx