Moduluxe Box Nightstand Instructions for Plinth Bed
Tools required
Phillips head screw driver
Insert and tighten two 2
” Allen bolts
through the holes in the back of the
back panel to the holes on the back
of the nightstand box.
Step 1:
Assemble the box nightstand
Step 2:
Attach the shelf support to
Align the 3 holes in the shelf support
with the 3 holes in the bottom of the
nightstand. Insert and tighten a set
of 1-
¼” screw and washer in each
of the 3 holes with a Philips screw
driver (Figure 2-1&2).
These instructions are for the
Moduluxe box nightstand. Please
identify the following items before
assembly.
Hardware included:
Alignment bracket (1)
Allen wrench (1)
5/8” pan head screws (2)
1 3/8” Allen bolts (3)
Allen wrench (provided)
2” Allen bolts (2)
2” Allen bolt
Back panel
Nightstand box
Shelf
support
the nightstand
1 ¼” screws &
washers
Figure 2-1
. Locations to attach screws
Figure 2-2
. Attach screws and washers from the
and washers
Figure 1
. Locations to attach screws
and washers
holes under the shelf support to the
holes under the nightstand box.
1 ¼” screws & washers (3 sets)
Back panel
Case Front
P a g e 1
