Ins truc tions for Ke a ton Be ds
Tools required
Components included:
Upholstered headboard (1)
Allen wrench (provided)
Step 1:
Attach the Base Assemblies to the Siderails
Align the holes on each end of the
Base Plate with the holes on siderail
cleats (
Figure 1
). Insert the 2
”
(50mm) hex bolts from the top of the
cleats and tighten with the provided
Allen wrench. Make sure the tip of
the leg is facing out.
Hardware included:
¼ - 20 x 50mm hex bolts (8)
1
Figure 1
.
Install
the Base Assembly
to
the Siderails
¼ - 20 x 50mm
hex bolt
Allen wrench (1)
Upholstered footboard (1)
Base assembly (2)
Platform hardware (1)
Siderail L (1)
Siderail hardware (1)
Platform kit (1)
Siderail R (1)
6” support block (1)
Base
Assembly
NOTICE:
Beds must be disassembled before moving to avoid damage. Never attempt to
move the bed while it is assembled. Failure to do so would void the warranty.
Base Plate
Siderail Cleat
Base Plate
Keaton Upholstered Bed
Cal King
King
78
1/2” x 88” x 49 3/4”
Queen
62
1/2” x 88” x 49 3/4”
74
1/2” x 92” x 49 3/4”
Please
identify the
listed items
before
installation.
Siderail
Siderail cleat
Leg
facing out
