COP-USA DVR2316SE-C User Manual Download Page 49

Page: 49 / 85

DVR User Manual

Step 1

: Enter into disk management interface

Note

: please format the hard disk before record.

Step 2

: Click Refresh button to refresh the disk information in the list box.

Step 3

: Select a hard disk and click Format button to start format.

Note

: All recorded files in the hard disk will be lost after formatting.

To check other information of disk

After you enter into Disk Management



Advanced tab, you can check model, S/N, firmware,

health status of the disk in this interface. You also can monitor the temperature, internal circuit,
dielectric material of the disk, analysis the potential problems of the disk and warn so as to
protect its data.

6.4 Upgrade

At present, it only supports USB update. Get the software from your vendor when there is a
new software version.
The upgrade steps are as follows:

Step 1

: Copy the upgrade software which gets from vendor into the USB storage device.

Step 2

: Connect the USB flash drive to the USB port.

Step 3

: Enter Menu



Upgrade tab. You will see the upgrade software name displaying in the

upgrade list box.

Step 4

: Select that software and then click Upgrade button. The system will be upgraded

automatically.

Note:

Please wait for a while when the system reboots. Any power interruption is not

allowed during upgrading.

6.5 Logoff

A log off dialogue box will pop up by clicking Log off icon. Then click OK button to confirm

to log off. If you want to log in again, click

icon to enter user name and password to

re-login.

Summary of Contents for DVR2316SE-C





















































































Search results

Summary of Contents for DVR2316SE-C

Reviews:

Related manuals for DVR2316SE-C

Brands by name

Popular brands

COP-USA DVR2316SE-C, User Manual

Search results

Summary of Contents for DVR2316SE-C

Reviews:

Related manuals for DVR2316SE-C

Brands by name

Popular brands