Section 4
7
Basic Operation
4
Warming Up
Warming up from 20.0°C to set point takes under normal conditions less than 30 minutes. When
a cold item is placed on the heated area, it may need up to 40 minutes to stabilize, depending
on the thermal mass of the object and the initial temperature.
Heated Area
T45:
The specified temperature within an area defined by a 4cm limit from the edges is at set
point ± 0.5°C.
It is recommend placing all items with a distance of 4cm from the edges of the warming plate.
T47:
Our general recommendations:
• Dark area only: ±0.3°C
• Whole area: ±0.8°C
Please see picture below for T47 heated area:
8 cm
8 cm
Note: If the nature of your work demands high accuracy of temperature, only the area located
8cm from the edges must be used.
Top view
