CooperSurgical K-Systems L100 IVF Series, Instruction Manual

Page: 54 / 88

54
INSTRUCTION MANUAL FOR L100 SERIES WORKSTATIONS
IMPORTANT: CONNECTING THE UNIT TO A WRONG VOLTAGE WILL CAUSE SERIOUS
DAMAGES TO THE SYSTEM.
WARNING
Do not defeat the safety purpose of the grounding-type plug. A grounding type
plug has two blades and a third prong is provided for
your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
8.1.3 Gas Connections
If the workstation is connected to gas bottles, be sure to use a high quality regulator that can be adjusted
around the required 0.5-0.7 bar (7.25-10.15 psi).
If the workstation is connected to plumbed gas circuits, verify that the pressure is in the correct range.
Connect the gas to the inlet on the workstation with a suitable silicone tube (1 tube is supplied with
the unit). Contact your Customer Service Representative if this piece is missing.
The inlet should have a gas source of 5-6% premixed CO
2
in air.