26
INSTRUCTION MANUAL FOR L100 SERIES WORKSTATIONS
6.9.2 Timer for the Heat (hEAt)
The HEAT option is used for the heater to
turn on at a certain time
.
NOTE:
This function only works in conjunction with St.St. If St.St is set to 8.00 and heat function is on,
the heater will automatically turn on at 8:00 AM using 24-hour clock.
Follow these steps to navigate in the HEAT (hEAt) option.
ACTION
KEY
DISPLAY
Press and hold both the UP
and
DOWN
keys for 3 seconds to enter the menu.
The option “uSEr” will appear in the display.
Press the SP key once, then press the
DOWN key until the option “hEAt” appears
on the display.
Press and hold the SP key to change the
values.
While holding the SP key, press either the
UP
or
DOWN key to select between ON
or
OFF.
When the required setting is activated,
release the SP key.
Press and hold both the UP
and
DOWN
keys for 3 seconds to exit the menu.
NOTE:
A dot will turn on in the right side of display, indicating that the Heat function is active.
Summary of Contents for K-Systems L100 IVF Series
