34
10
Data Logger
Activating Data Log Function for PC
Make sure that the communications protocol is activated in the menu. This can be checked by entering
the menu and rolling down to ‘r232’.
Choose ‘PC’ and leave the menu.
CAUTION:
Never attempt to switch off the dataflow when the PC program is logging
data, as this may cause loss of data. Stop the PC program to save all logged data
before turning data off on the incubator
NOTE:
The communication can be toggled between PC -> PDA ->OFF. The parameter must be set to
“PC” when a PC is attached. Switching to “OFF” or “PDA” when the PC is attached corrupts the data.
Summary of Contents for K-Systems G185 SensorTech
Page 55: ...55 11 Troubleshooting...
