CD Radio Boombox
F907
Instructions for Use
Please read and retain these instructions for future reference
v001: 17/04/19
Skip & search tracks
1.
Press the SKIP button (5) once during playback to skip to the next track. To skip to a specific track ahead,
press this button several times until you reach the track number required.
2.
Press the PREVIOUS button (7) once during playback to return to the beginning of the current track.
Press the PREVIOUS button twice repeatedly to skip to the previous track. To skip back to a specific track,
press this button several times.
3.
Hold the SKIP button (5) during playback to fast forward the current track.
4.
Hold the PREVIOUS button (7) during playback to fast rewind the current track.
Repeat & Random PLAYBACK KEY
Should you wish to play an entire disc in a random order or simply repeat a single track or entire disc, follow
the below steps.
1.
During playback of a CD, press the REPEAT button (6). After one press you will see a dot on the right of
the display flash, to indicate the current track will repeat.
2.
Press the REPEAT button (6) again and the dot on the right of the display will stop flashing. This indicates
the entire disc will repeat.
3.
Press the REPEAT button (6) once more, you will see the dot disappear from the display to indicate no
REPEAT function is active.
Programmed PLAYBACK KEY
To program an alternative playback order of tracks follow the below steps.
1.
Make sure the unit is not playing a disc.
2.
Press the PROGRAM button (10) once. The program sequence “01” appear on the LED display and the
PROGRAM LED indicator (9) flashes.
3.
Select the first track to be programmed using either SKIP button (5) or PREVIOUS button (7).
4.
Press the PROGRAM button (10) again to store and advance to the next programmed track.
5.
The program sequence indication changes to “02” momentarily waiting for your next input.
6.
Repeat the steps above to program more tracks. A maximum of 20 tracks can be programmed.
7.
Press the PLAY/PAUSE button (11) to begin the programmed playback in the preferred order.
8.
You can press the STOP button (12) to terminate programmed playback.
Radio operation
1.
Wake the unit from STANDBY mode if required.
2.
Slide the FUNCTION/RADIO BAND switch (15) to the FM or MW position.
3.
Extend the antenna fully, and angle for best reception (you may need to adjust once tuned to a station).
4.
Tune to the required station using the TUNIN DIAL (14).
NOTE: When receiving an FM broadcast, fully extend the telescopic antenna and angle it for the best
reception.
5.
Adjust the volume to a comfortable listening level using the volume control (2).
Aux audio input
Connect an external audio source like an MP3 player using a 3.5mm audio cable (not supplied).
1.
Connect one end of the cable to the MP3 players headphone output and the other end to the LINE
INPUT socket (17) on the rear of the unit.
