3W CREE Rechargeable Torch
10690
Instructions for Use
Please read and retain these instructions for future reference
v004: 22/07/20
TECHNICAL DETAILS:
TRANSFORMER MODEL:
IPX3
INPUT VOLTAGE:
100-240V a.c.
OUTPUT VOLTAGE:
4.5V d.c. 500ma.
POWER FREQUENCY:
50-60 Hz
WATTAGE:
3W
BATTERY DETAILS:
Lithium-Ion 2200mAh (included)
BATTERY INSTALLATION:
BEFORE FIRST USE:
There is a small plastic insulating disc in the battery compartment to protect the
battery in transit. This must be removed before use. Unscrew the cover and
remove the disc.
Install the battery with the positive end (with groove) towards the torch head, then
replace the cover.
The battery is pre-charged.
Do not charge before first use.
When light from the torch becomes dull, it is time to recharge the battery
RE-CHARGING:
Remove the cover from charger socket and plug the charger into
the torch.
When the charger is plugged into the mains socket, the charger
LED will be green.
Plug the charger into the socket on the torch.
When charging, the charger LED will be red.
Once the torch is fully charged, the LED will turn green.
Always discharge the torch fully before recharging.
Once fully discharged the battery will take up to 7 hours to
re-charge.
