Milk Frother with Stand
11087
Instructions for Use
Please read and retain these instructions for future reference
v001: 31/01/18
Technical Data
Model:
Battery operation:
MF-001
2x 1.5 V UM 3, AA (not included)
Instructions for Use
General Safety Instructions
Read the operating instructions carefully before putting the appliance into operation and keep the
instructions including the warranty, the receipt and, if possible, the box with the internal packing.
•
This appliance is not fit for commercial use. For domestic use only.
•
Keep the device away from heat, direct sunshine and sharp edges.
•
Do not use the appliance with wet hands.
•
Do not use the appliance in a damp or humid environment.
•
In order to avoid an electric shock, this appliance must not be exposed to dripping water or water
spray.
•
The milk frother should always be immersed in the liquid before it is switched on.
•
Please do not use the frother if the axle is bent.
•
This appliance should only be used for the purpose intended.
•
Please do not immerse the housing in water.
Before Initial Use
Please wipe off the milk frother with a moist cloth before initial use or when it has not been used for a
prolonged period.
Inserting the Batteries (Batteries are not supplied)
•
The battery compartment is located under the on/off switch. Push open the battery compartment
lock to the side.
•
Insert 2 batteries of type UM3 AA 1.5 V. Ensure the correct polarity (see the floor of the battery
compartment or the imprint on the outside)! If the device is not used for a prolonged period, please
remove the batteries.
•
Different battery types or new and used batteries must not be used together.
•
Then close the battery lid.
Frothing coil
