Cherry Blossom Tree Table Lamp
H661
Instructions for Use
Please read and retain these instructions for future reference
v001: 26/03/21
SPECIFICATION
KEEP THIS INFORMATION FOR FUTURE REFERENCE
Rated Voltage:
24V
Total Product Rating :
3.6W
Nominal Frequency :
50-60Hz
Total bulbs per set
48
LED bulbs :
3V 0.02A 0.06W NON REPLACEABLE
Transformer Plug:
31V DC 3.6VA
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Instructions for use
This product is suitable for indoor use only.
The light set operates with a 31V isolating transformer. Only use with the 31V transformer supplied.
Installation
1.
Carefully open the packaging and remove the tree ,transformer, plastic flowers if any have come off the
lights.
2.
After unpacking the product, place the tree stand on a level surface.
3.
If some of the flowers have come off, carefully push them back on the lights.
4.
Create the shape of the tree by gently expanding the tree branches
5.
Connect the light chain cable to the transformer then plug the transformer into the mains.
6.
Using the rocket switch, turn lamp on and off.
48L WARM WHITE LED
BLACK SQUARE METAL BASE 12CM X 12CM
3M LEAD CABLE
•
WIRED POSITIONAL BRANCHES SO THAT YOU CAN
POSITION TO YOUR LIKING
•
WARM WHITE LEDS GIVE A BEAUTIFUL EFFECT AND ARE
ENERGY EFFICIENT
•
ADDS ATMOSPHERE IN ANY ROOM
