180 Flashlight
G714
Instructions for Use
Please read and retain these instructions for future reference
v001: 13/02/20
INSTALL BATTERIES
1 2 3 4 5
1. Take the product out of the packaging box.
2. Rotate the end cap anti-clockwise and then separate it from the handle.
3. Take the battery holder out of the handle.
4. Install 3 * AAA batteries (not included) in the battery chamber following the right polarities.
5. Push the battery chamber back in to the handle. Replace the end cap and rotate it clockwise.
USE
1 2 3
The ON/OFF button is at the upper part of the handle. The alarm button is at the lower part of the head.
TEST AS A FLASHLIGHT
The button has a 3-step cycle as follows:
1. Press the button once. The front lights turn on.
2. Press the button again. The front and side lights turn on.
3. Press the button the third time. The front and side lights turn off.
TEST AS AN ALARM
Press the button once. The alarm is on and the front lights flash quickly (strobe).
Press the button again. The alarm and the front lights turn off.
Alarm
button
On/OFF
button
