Lipstick Hair Remover F982
Instructions for Use
Please read and retain these instructions for future reference v002: 02/12/19
INSTRUCTIONS FOR USE:
NOTE: Prior to first use, test on a small area. If any sensitivity or allergic reactions occur, discontinue use
immediately. Do not use on sensitive or irritated skin.
Installing/Changing Battery
Remove the cap (Image 1)
Grab the upper section of the unit with one hand, the
bottom half with the other, and pull apart (Image 2) to reveal
the battery chamber
Place 1x 1.5V DC AA battery (not included) into the
compartment, making sure the positive pole (+) is facing the
bottom of the unit.
Slide/snap the unit’s bottom casing back into place (Image 2)
How to Use
Remove the cap (Image 1)
Slide the gold switch located on the side of the unit upward
into the “ON” position (Image 3). The light will automatically
turn on when the unit is “ON”.
Gently press the head of the unit flat against your skin. The
unit should not be at an angle. Make small circular motions
to remove unwanted hair. (Image 5).
NOTE: It is normal for the head to become warm with use.
Cleaning (Be sure unit is off)
Twist the rotating hair removal head counter-clockwise and
lift off (Image 4).
After each use, clean the head by using a brush (included) to
wipe away the hair residue.
Empty any hair from the body of the unit by turning it over
and gently tapping the sides.
To put the hair removal head back on the unit, line up the
“groove” indicators on the cap with those on the unit and
twist clockwise (Image 4).
Tips & Pointers
For superior results, use on hair ¼” length or less.
If the unit begins to slow down, clear the hair removal head
and body of any hair residue. If the unit is still running slowly
change the battery.
Gentle enough to use every day.
For airbrush-like make-up application, use daily.
