Freestanding 5x Magnifying LED Lamp
9666
Instructions
Please read carefully before use and retain for future reference.
PARTS
A.
L
ower pole
B.
C. Flexible neck
D.
L
amp head
E. Upper pole
F. Stem cable
G. Mains adapter
H. Collar
I. Lock connector
J. ON/OFF switch
ASSEMBLY
1. Take the flexible neck(C) and feed the stem cable(F) through
2. Screw the upper pole(E) clockwise into the flexible pole(C).
3. Feed the stem cable(F) through the lower pole(A).
4. Screw the lower pole(A) clockwise into the upper pole(E).
5. Connect the two ends of the cable by press the lock
6. Turn and tighten the metal collar(H) onto the base(B).
7. Carefully feed the excess cable into the lower pole(A).
USE
• Hold reading material directly parallel to the magnifier
lens. If not positioned correctly, the reading material
may appear distorted.
• The
L
EDs are specially formulated to simulate the
characteristics of natural sunlight. They are non-
replaceable and should give up to 50,000 hours of use.
• Turn off and unplug the light when not in use.
E
C
D
J
F
A
H
I
B
G
K. DC plug
K
Take care not to pinch the cable.
Take care not to pinch the cable.
the upper pole(E).
connectors(I) into place.
Do not cut or shorten the cable.
8. Take out the screw and insert the lower pole(A) into
the metal collar(H).
9. Check direction of the lamp head and line up the screw hole
and use a screwdriver to tighten the screw.
10.
Connect the DC plugs(K) on the external power cord.
11.
Plug adapter into main outlet and turn on the lamp using
the ON/OFF switch(J).
L
L
L
Base
Upper pole
n
