background image

Installation Instructions C3PC-2-D-Emergency Power Control

Greengate

Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product must be performed 

by a qualified electrician. This product must be installed in accordance with the applicable installation code by a person 

familiar with the construction and operation of  

the product and hazards involved. For continued protection against shock hazard replace all covers and guards after field 

wiring is completed.

Before installing or performing any service, the power MUST be turned OFF at the branch circuit breaker. According to NEC 

240-83(d), if the branch is used as the main switch for a fluorescent lighting circuit,  

the circuit breaker should be marked with “SWD”. All installations should be in compliance with the National Electric Code and 

all state and local codes.

Risk of Personal Injury- Due to sharp edges, handle with care. Always use at least two people when lifting and mounting heavy 

or large units

Failure to comply with these instructions may result in serious injury (including death) and property 

damage.

DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise from 

the improper, careless, or negligent installation, handling or use of this product. 

 

IMPORTANT:

 Read carefully before installing product. Retain for future reference. 

NOTICE:

 Product may become damaged and/or unstable if not installed properly. 

Note:

 Specifications and dimensions subject to change without notice.

ATTENTION Receiving Department:

 Note actual product description of any shortage or noticeable damage on delivery receipt. 

File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15 days of delivery. All 

damaged material, complete with original packing must be retained.

Emergency Power Control

NOTICE:

 All new wiring must be fully verified before applying power.

NOTICE:

 Designed for indoor installation and use only. Dry location rated.

  WARNING

Summary of Contents for C3PC-2-D







Reviews: