Fast-Track Set-up Guide for
SAFEPATH4
SP40S/SP40SE Panel
This guide has been created to provide you with a fast track setup to get your
SP40S or SP40SE
panel up and
running using the digital voice messaging and live voice modes of operation. Other modes, which include night
ring, telephone paging and background music and other features, are discussed in the technical manual. This guide
is not to take the place of the Installation, Testing, Operation and Maintenance Manual, which you received in this
package. When in doubt, refer to the Manual for additional information.
Always Obey All Safety Precautions
and Warnings.
1. Inventory
When you receive your new Panel, check to see that you have the following items:
•
SP40S or SP40SE
Panel.
•
Package of test EOLRs (End of Line Resistors)
•
Operation and Installation Manual
•
2 UL Listed 10K Ohm EOLRs.
•
Hardware Kit containing Battery connection wires
2. Mounting
MAKE SURE THAT ALL EXTERNAL WIRING IS REMOVED, AND ALL ELECTRICAL
COMPONENTS ARE CLEAR BEFORE DRILLING MOUNTING HOLES AND MOUNTING THE
SP40S/SP40SE
PANEL
.
1. Open the front cover and dead front panel.
1
TB
14.00"
3/4" - 1" Conduit
Knockouts (18 Places)
Grounding
Terminal
Block
2" - 2 1/2" - 3" Conduit
Knockouts (2 Places)
AU
24
SP
AU
CC/
24V
17.00"
2. Mount the Panel in the desired location-using Figure 1 for hole configuration.
Figure 1
