Cooper Notification SP40S Series, Installation, Testing, Operation And Maintenance Manual

Page: 22 / 81

Overview
SP40S Multi-Function Communications System 22
AC W
iring
(NON-POWER
LIMITED)
Wiring to Battery
(NON-POWER
LIMITED)
*
*
GROUNDING
TERMINAL
BLOCK
MOTHERBOARD
USER INTERFACE
MUST BE ROUTED OUT
BOTTOM LEFT OF ENCLOSURE
Figure 2 Layout of SP40S Panel
3.5 User Interface
The User Interface of the SP40S Multi-Function Facility Communication System displays
the basic status of the unit as well as allowing for a limited amount of user controls.
Table
2
identifies the pushbuttons and indicators.
Table 3
describes the different operation for
Messages 1-6 on the SP40S-D and SP40SE-D.
Message 1
Message 2
Message 3
Message 4
Message 5
Message 6
Message 7
Message 8
Figure 3 SP40S User Interface