background image

P82623 F 

Sheet 6 of 6 

WARNING:  IF AMT MULTITONE APPLIANCES ARE OPERATED WITHIN 15 INCHES OF A PERSON'S EAR, THEY CAN PRODUCE A SOUND 

PRESSURE LEVEL THAT EXCEEDS THE MAXIMUM 120 dBA PERMITTED BY ADA AND OSHA RULES.  EXPOSURE TO SUCH SOUND LEVELS 
CAN RESULT IN DAMAGE TO A PERSON'S HEARING. 
 

WARNING:  NFPA CODES REQUIRE SIGNALING APPLIANCES TO BE SUPERVISED.  CHECK TO BE CERTAIN THAT UNSUPERVISED 

SIGNALING APPLIANCES DO NOT VIOLATE ANY APPLICABLE CODES. 

 

CAUTION:  

Check the installation instructions of the manufacturers of other equipment used in the system for any guidelines or restrictions on wiring 

and/or locating Notification Appliance Circuits (NAC) and notification appliances.  Some system communication circuits and/or audio circuits, for 
example, may require special precautions to assure electrical noise immunity (e.g. audio crosstalk). 
 

 
NOTE:

  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These 

limits are designed to provide reasonable protection against harmful interference in residential installation.  This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 
communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:  1) Reorient or relocate the receiving antenna, 2) Increase the separation between the equipment 
and receiver,  3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, and  4) Consult the dealer or an 
experienced radio/TV technician for help. 
 

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. 

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. 

 

The AMT Multitone products and these instructions are copyrighted by Cooper Notification and contain proprietary, confidential and trade secrets of 
Cooper Notification.  No part of the AMT Multitone products and these instructions may be photocopied, printed or reproduced in any form or modified, 
adapted, changed or enhanced, or converted to another programming language, or used to create updated, related or derivative works, without the prior 
written consent of Cooper Notification.  No part of the AMT Multitone shall be decompiled, disassembled or reverse engineered. 

 

ANY MATERIAL EXTRAPOLATED FROM THIS DOCUMENT OR FROM COOPER NOTIFICATION MANUALS OR OTHER DOCUMENTS 
DESCRIBING THE PRODUCT FOR USE IN PROMOTIONAL OR ADVERTISING CLAIMS, OR FOR ANY OTHER USE, INCLUDING DESCRIPTION 
OF THE PRODUCT'S APPLICATION, OPERATION, INSTALLATION AND TESTING IS USED AT THE SOLE RISK OF THE USER AND COOPER 
NOTIFICATION WILL NOT HAVE ANY LIABILITY FOR SUCH USE. 

 

 
01/16 

Summary of Contents for AMT-12/24







Reviews: