DESCRIPTION
Catalog #
Type
Project
Comments
Date
Prepared by
www.cooperlighting.com
SPECIFICATION FEATURES
7.25”
9.75”
12.00”
13.00”
8.18”
4.63”
4.63”
Ceiling
Cut-Out
4.141”
A ...Housing
Housing and plaster frame: 18 gauge CRS
with flat black powder coated internal
finish. Aperture ring depth is factory
configured to accommodate specified
ceiling thickness.
B ...System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture.
Vent holes in housing provide cooler
operation.
C ...Electrical
Integral j-box and electronic metal halide
ballast. 120V/277V input. Junction box
is U.L. listed for through branch wiring.
Includes five 1/2 trade size knockouts.
D ...Lamp
MR16 metal halide lamp 20 or 39 watts.
GX10 TAL lamp socket included. Provides
360º rotation of trim and secures original
trim position after relamping.
E ...Mounting
Hanger Bars and Butterfly Brackets
included for residential and commercial
applications respectively.
Ceiling Cut-Out: 4.141” sq.
QUIET CEILING
TRIMLESS
QCT907SPMH
Special Ceiling
Metal Halide
Housing
for Square Trim
FOR METAL HALIDE MR16
20W or 39W
ORDERING INFORMATION
Housing
QCT907SPMH
=
Quiet Ceiling
Special Ceiling Housing
for Square Trim
w/Integral Metal Halide Ballast
Voltage
120
=
120 volts primary
277
=
277 volts primary
Special ceiling housing for Quiet Ceiling square trimless fixtures. Includes
electronic metal halide ballast for use with 20W or 39W MR16 Metal Halide
lamp.
For installation in non-plaster/drywall ceiling materials such as wood,
marble or concrete. Insulation must be kept 3” from all sides and at least
1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349- 3031
Lamp Wattage
20
=
20 watts
39
=
39 watts
QCT907SPMH
rev. 030108
Ceiling Thickness
Specify - 2.25” max.
Cut-out in ceiling material must be
sized perfectly to the diameter of the
plasterframe collar for trimless effect.
Ceiling Material
