NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be
modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.
717
COOPER LIGHTING
SHELL II
201-IP
201-D/I
S E M I - I N D I R E C T ( I P )
D I R E C T- I N D I R E C T ( D / I )
SUSPENDED
Construction:
Housing is one-piece, die-formed,
cold rolled steel, forming a 10-3/4” x 2-1/2” curved
architectural profile. Perforated sections are 33%
open with staggered hole pattern and opal diffuser.
Standard 4’-0”, 8’-0” and 12’-0” luminaire lengths
combine for continuous runs.
End Caps:
End caps are precision die-cast
aluminum mechanically attached without exposed
fasteners.
Reflectors:
Center reflector is die-formed, highly
specular aluminum.
Electrical:
Luminaires are prewired with quick wire
connectors and use UL list Class P, T5HO or T8
program rapid start universal voltage electronic
ballasts. Power factor of 97% with less than 10%
THD. Fixtures and electrical components certified to
UL and CUL standards.
Finish:
Luminaire housings are standard white
using electrostatically applied acrylic powder coat
paint.
Mounting:
Standard mounting includes dual
aircraft cable and mounts directly to all ceiling
types. Row mounted fixtures are continuous with
hairline joints unless
Articulated Joint
option is
specified. Mounts on fixtures with
Articulated Joint
option will not align with grids.
T8 = 1, 2, 3 Lamp
T5 = 2, 3, 4 Lamp
S
10-3/4" [275mm]
2-1/2"
[63mm]
• Die formed steel perforated
modular housing lengths –
4’, 8’ and 12’ (201-IP only).
• Optional articulated joiners
[not suitable for precise
incremental mounting
centers]
• Dual aircraft cable hangers
for superior leveling.
• Incremental mounting on the
ceiling grid - 4’, 8’ and 12’
(201-IP only) centers.
• Wide number of T5 and T8
lamping options.
• Precision die cast end caps.
201-D/I features
• RPerformance TM parabolic
semi specular louver for RP-
1 compliance.
• Die formed modular housing
lengths – 4’ and 8’
• Incremental mounting on the
ceiling grid - 4’ and 8’
centers.
Ordering Information:
Sample number: 201-IP-SP-1T5HO-1C-277-DC48-T1-48
Series
201-IP
=Shell II
201-DI
=Shell D/I
Optics Up
S
=Specular
Optics Down
P
=Perforated (IP)
H
=RPerformance ™ Louver (DI)
Number of Lamps
(not included)
1
=1 Lamp (T5HO)
3
=3 Lamps (T5HO, T8)
2
=2 Lamps(T5HO, T8)
4
=4 Lamps (T8)
Lamp Type
(Length)
T5HO
=54W (4’ Unit)
T8
=32W (4’ Unit)
Number of Circuits
1
1
=1 Circuit
2
=2 Circuits (*Standard 2 circuit option will switch
Inboard lamps together. Out board lamps will be on
circuit two.)
Wiring
1
C
=Standard Circuit
B
=Battery Pack
D
=Dimming
E
=Emergency/Nightlight
T
=Nightlight
*Slim line ballast only (small case)
Voltage
1
1
=120V
2
=277V
3
=347V
U
=Universal
Suspension
D
=Dual Cable
P
=Rigid Pendant
4
(single stem)
Power Feed
1
C
=Straight Cord
P
=Rigid Pendant
K
=Curly Cord
Suspension Length
-Adjustable Cable
48”, 120”, 240”, 300” or 360” (infinite adjustment along entire cable)
-Rigid Pendant
2
12”, 15”, 18”, 21”, 24” or 27”
Ceiling Type
T1
=1” T-Bar
ST
=Structure
TS
=Slotted T-Bar
T9
=9/16” T-Bar
JB
=4” Octagonal J-Box
Run Length
(Specify luminaire length in feet)
-Individually Mounted Luminaires may be 4’, 8’ or 12’ in length.
-Continuously Mounted Standard row configurations over 12’ consist
of 8’ and 12’ sections.
Joining
3
AJ
=Articulated Joining Luminaire sections may be joined with an
optional aluminum coupler, which visually separates sections. Refer to
back page for mounting details.
1 Due to various constraints, some options may not be combined with others.
2 Consult factory for custom rigid pendant lengths.
3 Articulated Joining option will not align with grids.
4 Available with 7° or earthquake 45° swivel canopy assembly.
1-1/4"
8’
8’
AJ - Articulated Joining
Optional aluminum coupler
END CAP
B
10-3/4" [275mm]
2-1/2" [63mm]
1-1/4" [32mm]
= Slim Line Ballast only.
S T A N D A R D L U M I N A I R E L E N G T H S *
S
NEO-RAY
™
