These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.
Embedded Mounting Kit
1.
The embedded mounting kit is intended for use when it is
desirable to cast the mounting bracket into a poured wall.
For orientation of the fixture to the junction box, See Fig. 1.
2.
Make sure all power is off.
3.
Pull the power supply wires through the junction box and
through the center hole of the embeddment plate, leaving 6"
for connections.
4.
Using the two (2) screws supplied with the junction box, attach
the plate to the junction box, with gaskets and studs facing away
from the wall. (See Fig. 2)
5.
Position the assembly in the wall as desired.
VISION WALL
VWS/EM
2/17/04
IMI-434
INSTALLATION INSTRUCTIONS
IMPORTANT:
Read carefully before installing fixture. Retain for future reference.
TM
Fig. 2
WARNING:
Make certain power is OFF before starting installation or attempting any maintenance.
Fig. 1
9.47
4.09
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269
IMI-434 AVU040293
