Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
04/17/2007 1:28:37 PM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADC041537
SIDE DIMENSIONS
MOUNTING DIMENSIONS
DESCRIPTION
Designed to retain the aesthetics of a commercial wraparound, Fail-Safe's
FWS Series assures owners an unbreakable, maintenance free, one time
installation. Ideally suited for high abuse areas that must maintain a clean,
well lighted appearance, Fail-Safe's FWS comes as ceiling or wall mounted,
one to four lamp units to provide general ambient illumination.
The FWS Series is specifically designed for use in public access areas where
vandalism may occur and for areas that must maintain a clean, well-lighted
appearance. Ideal for schools, dormitories, hallways, locker rooms, shower
facilities, and restrooms.
A ... Lens
Nominal .156, UV stabilized, clear
K12, impact resistant, prismatic
polycarbonate refractor for high
efficiency, low surface brightness
and maximum strength.
B ... Fasteners
Captive, stainless steel
tamperproof torxhead screws
prevent unauthorized access.
C ... Housing
Die-formed 16 ga. CRS with
welded and ground ends and
internal weld bands for
C ... Housing Cont.
added strength. Standard white
high reflectance polyester powder
coat finish. Gloss: 85%;
Reflectance: 93%; Hardness
Minimum: 2H; Salt Spray: 500
hours.
D ... Lamps
(By Others)
E ... Lens Retention
Double wall lens channel
captivates lens to prevent
unauthorized fixture penetration.
F ... Gasket
Concealed, polyurethane end
gaskets inhibit the entrance of
environmental contaminants.
G ... Ballast
Copper wound HPF, rapid start,
Class P, CBM/ETL ballast is
standard.
Labels
U.L. listed, C.S.A. certified,
standard wet label.
FWS
17W - 120W
Fluorescent
POLYCARBONATE
HIGH ABUSE LUMINAIRE
Clear Prismatic or White
1 and 3 Lamp
G
D
F
E
C
B
A
12 1/8"
[308mm]
49"
[1245[mm]
4 9/16"
[116mm]
4"
[102mm]
4 11/16"
[119mm]
12 1/8"
[308mm]
(4) 3/8" [10mm]
Dia. Mt. Holes
2 1/2"
[64mm]
20"
[508mm]
16"
[406mm]
25"
[635mm]
4"
[102mm]
4"
[102mm]
19 1/2"
[495mm]
19 1/2"
[495mm]
22"
[559mm]
22"
[559mm]
49"
[1244mm]
(4) 7/8" [22mm]
Dia. KO
(6) 3/8" [10mm]
Dia. Mt. Holes
(5) 7/8" [22mm]
Dia. KO
2 1/2"
[64mm]
(4) 3/8" [10mm]
Dia. Mt. Holes
3 1/2"
[89mm]
3 1/2"
[89mm]
20 1/2"
[521mm]
20 1/2"
[521mm]
49"
[1244mm]
12 1/8"
[308mm]
7/8" [22mm]
Dia. KO
TORX
®
is a registered trademark
of Camcar Division of Textron Inc.
E N E R G Y D ATA
For Energy Management related
technical data to support the
performance of this fixture series,
refer to the ordering information for
input wattage.
FAIL-SAFE
®
