background image

In Operation

Please do not operate the controller with wet hands, which may lead to 
electric shock.

Please turn off the main power immediately when the safety device starts 
repeatedly or the operation key acts abnormally.
Due to the possibility of electric leakage or overcurrent, accidents such as 
electric shock, a fire and explosion may occur. Please contact the distributor 
or our designated service center.

In case of abnormality (smell of burning, etc.), please stop operation 
immediately and cut off the main power supply. Operation under abnormal 
conditions may lead to failure, electric shock, a fire and other accidents. 
Please contact the distributor or our designated service center.

Strictly prohibit the ingress of water during maintenance. Otherwise it may 
lead to electric shock.

Do not alter the electrical wiring without permission, which may lead to major 
accident.

Do not cut off the power supply within 3 minutes after pressing the key of the 
controller, which may lead to misoperation.

Other Warnings and Precautions

Servicing · Relocation

Please contact the distributor or our designated service center for 
servicing of the air conditioner units.
Improper servicing or installation may lead to electric shock, a fire and 
other accidents.

Please contact the distributor or our designated service center for servicing 
or relocation of the controller.
Improper servicing or installation may lead to electric shock, a fire and 
other accidents.

Warning

Warning

Warning

Safety Instructions

Summary of Contents for SPWT-A01

































Reviews: