Cooper & Hunter CH-CH10SNM, Service Manual, Page: 38 / 67

36
Mini Chiller
Service Manual
Loosen the two screws fixing the motor. Pull
backward and remove the motor. (See Fig .10)
Loosen the wire of motor, and pull it through
the hole.
4) Remove the 4-way valve and capillary tube
a) Remove the 4-way valve
Loosen the screws fixing the coil of 4-way valve
.
Remove the coil of 4-way valve
.
Welding out the tubes connected to the 4-way
valve.
Remove the 4-way valve. (See Fig.11)
Note
:
When welding, the valve should be
covered by wet cloth in order to avoid the high
temp. hurt
.
b) Remove the capillary tube
Welding out the tubes connected to the capillary
tube.
Remove the capillary (See Fig.12)
Fig. 10
Fig. 11
Fig. 12