Super 80 Professional – AOM
NORMAL PROCEDURES
Section 3 Page 13
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
COCKPIT CLEAN-UP INSPECTION
COCKPIT CLEAN-UP INSPECTION
For flights other than the first origination flight of the day for the aircraft, only the Cockpit
Clean-Up Inspection needs to be accomplished.
WALK-AROUND INSPECTION .................................................................................... COMPLETED
1.
Not simulated.
PROTECTIVE BREATING EQUIPMENT ................................................................................. CHECK
2.
Not simulated.
SHOULDER HARNESSES ...................................................................................................... CHECK
3.
Check the condition of the shoulder harnesses. (Not simulated)
FLIGHT CREW OXYGEN SUPPLY CYLINDER ...................................................................... CHECK
4.
Not simulated
LOGBOOK .......................................................................................................................... CHECK
5.
Check the aircraft papers. (Not simulated)
CIRCUIT BREAKERS ............................................................................................................ CHECK
6.
Not simulated.
BATTERY SWITCH ....................................................................................................................... ON
7.
Set the battery switch to the ON position.
EMERGENCY POWER ............................................................................................................... OFF
8.
Set the Emergency Power switch to OFF.
APU PWR and EXT PWR Switches ........................................................................................... OFF
9.
Set the APU PWR switch to OFF.
10.
Set the EXT PWR switch to OFF.
APU (When required) .......................................................................................................... START
11.
Please refer to STARTING APU Procedure guide on how to start the APU.
EMERGENCY LIGHTS.............................................................................................................. ARM
12.
Set the EMER LTS switch to ARM.
FLIGHT RECORDER ...................................................................................................... TEST/NORM
13.
Open the guard and set the Flight Recorder Test switch to TEST.
14.
If the FLIGHT RECORDER OFF light stays off, the Flight Recorder operates properly.
15.
Set the Flight Recorder Test switch back to NORM and the guard back on.
GALLEY POWER ........................................................................................................................ ON
16.
Set the Galley Power switch to ON.