Super 80 Professional – AOM
FLIGHT MANAGEMENT
Section 15 Page 35
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
Waypoint Constraint (AT XXXXX)
Displays the first waypoint with a
speed/altitude constraint as entered on the
RTE LEGS page by the flight crew or by
procedure. After passing this constraint, the
next one is automatically displayed.
The waypoint constraint can be deleted
here or on the RTE LEGS page.
The AFMC will command the aircraft to fly
the constraint speed or the current
performance speed, whichever is less.
Error At Waypoint (ERR AT XXXXX)
Displays calculated undershoot for the
waypoint constraint. Display shows altitude
discrepancy and distance past the
waypoint that the altitude will be reached.
MAX ANGLE
Displays maximum angle of climb speed.
ENG OUT
Currently not simulated.
CLB DIR (Climb Direct)
Displayed when climb is active and an
altitude constraint exists on the active route
at a waypoint between the current altitude
and cruise altitude.
Selection deletes all altitude constraints
between the current altitude and cruise
altitude, allowing a direct climb to cruise
altitude.
Cruise
ACT ECON CRZ
The cruise page is used to display various
cruise flight data and to change the cruise
mode.
Available modes are:
•
Economy
•
Selected speed
•
Long-range
•
Engine out (not simulated)
Page Title
Displays active cruise mode:
•
XXXKT if controlling to a fixed speed
•
M.XXX if controlling to a fixed Mach
speed
•
ECON if controlling to economy
speed based on cost index set on
PERF INIT page
•
LRC if long range cruise is selected
LIM SPD if controlling to a limit speed, e.g.
V
MO
/M
MO