Super 80 Professional – AOM
FLIGHT MANAGEMENT
Section 15 Page 31
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
Progress
PROGRESS Page 1/2
This page displays various flight progress
data.
LAST
Displays the last passed waypoint, along
with altitude, time and fuel remaining at that
waypoint at the time the waypoint was
passed.
TO
Displays the waypoint identifier, distance to
go, estimate time of arrival, and estimated
fuel remaining for the active waypoint.
NEXT
Displays the waypoint identifier, distance to
go, estimate time of arrival, and estimated
fuel remaining for the waypoint after the
active waypoint.
DEST
Displays the destination identifier, distance
to go, estimate time of arrival, and
estimated fuel remaining at the destination.
If a modification is in progress, information
on the Progress page is relative to the
modified flight plan.
An alternate destination waypoint may be
entered over the displayed destination. The
DEST label is replaced with DIR TO ALTERNATE
and the information shown is based on flying
direct to the alternate airport. Reset the
display back to the original destination by
using the delete key.
Speed Display
This readout displays the active command
speed and mode.
LRC SPD or ECON SPD are displayed if active
on the performance page.
SEL SPD is displayed when a selected
airspeed or Mach is active.
LIM SPD is displayed if speed is being limited
by V
MO
, M
MO
or FLAP limit or ALPHA limit.
SPD OVRD is displayed when FMS override is
active.
E/OUT SPD is displayed when the engine out
mode is active.
TO TC Display
Displays ETA and distance to Top of Climb
when climb is active.
Other displays are:
•
TO TD – When cruise is active and
within 200 nautical miles of TD.
•
TO ED – When descent is active.