Super 80 Professional – AOM
FLIGHT MANAGEMENT
Section 15 Page 25
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
Route Data/Select Desired Waypoint
ACT RTE 1 DATA
Displays ETA at all route waypoints.
Permits entry of forecast winds at cruise
waypoints.
Estimated Time of Arrival (ETA)
AFMC calculated time at waypoint.
ETA calculations assume flying planned
vertical profile speeds and a direct flight
across discontinuities.
CRZ WIND
Transferred from PERF INIT page to cruise
waypoints. If no wind entry is made on the
PERF INIT page, 000°/00 is displayed.
The flight crew can overwrite cruise winds.
Wind field is blank for waypoints other than
cruise waypoints.
LEGS
Selection displays the RTE LEGS page.
SELECT DESIRED WAYPOINT (WPT)
This page is displayed automatically when a
database identifier is called for which has
more than one geographic location.
Permits selection of a specific waypoint
when the identifier is not unique.
Line selection selects that waypoint location
for use and returns to the page previously in
use.
Latitude and longitude of desired waypoint
must be known.
Navaid frequency and latitude/longitude
position for the selected identifier is
displayed for all geographic locations of the
identifier.