Super 80 Professional – AOM
FLIGHT CONTROLS
Section 13 Page 13
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
FLAP/SLAT SYSTEM
1. FLAP/SLAT Lever
Move FLAP/SLAT lever to any of the six
permanent detents to set flap and slat as
required by the current flight conditions.
2. FLAP POSITION Indicator
The indicator has two digital horizontal bars
which move vertically to indicate the
position of the left and right flaps
respectively.
3. SLAT ADVISORY LIGHTS
TAKE-OFF
(Blue) Indicates the FLAP/SLAT
lever and wing slats are in the
take-off range.
DISAGREE (Red) Indicates left and/or right
wing slats position disagrees
with the FLAP/SLAT lever.
AUTO
(Blue) Indicates the slats have
automatically been extended
from the mid-sealed to the
extend position by the stall
warning system.
LAND
(Green) Indicates FLAP/SLAT
lever is set at more than 24
degrees and slats are fully
extended.
