DOC-040 Iss1
9
7.
Product Options and Order Codes
See website (
Microscope Illuminators | LED Illumination Systems | CoolLED
for full details of product options and order codes.
8.
Warranty and Repairs
Please refer to CoolLED’s current Warranty Policy available on our website
. Although warranty terms are fixed at the time
of ordering according to the terms and conditions of sale in place, the
Warranty Policy may be subject to periodic change so please check to avoid
confusion.
For any warranty queries or in the event of the product developing a fault,
make contact with
for further assistance. You shall be
asked to provide your microscope make and model, the product serial
number and a brief description of the issue. You shall then be issued with a
Support Case to manage your issue.
9.
Compliance
9.1.
WEEE
All qualifying products that are subject to the WEEE Directive and supplied
by CoolLED are compliant with the WEEE marking requirements. Such
products are marked with the "crossed out wheelie bin" WEEE symbol and in
accordance with European Standard EN 50419.
CoolLED Certificate No: WEEE/GB4236XX
9.2.
RoHS
Based on information obtained from our component suppliers, this
statement certifies that ALL products manufactured and supplied by CoolLED
Ltd are in compliance with Directive 2011/65/EU of the European Parliament
and of the Council of 8 June 2011 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment (also known as
“RoHS”).
This declaration is correct to the best of CoolLED Ltd knowledge, information
and belief at the date of its release.
