27
Running AnyplaceUSB Software Program in CLIENT Mode
The AnyplaceUSB software program client mode can discover USB server device
installed in your local network automatically, in most cases there is no need to specify
remote IP address or the hostname of the USB server devices. Select the correct USB
server device from the list in order to connect to the remote shared USB devices.
To connect from client computer to a remote USB device shared on the USB server
device, you should first find available shared USB devices and add them into client
computer. The shared USB devices are detected by AnyplaceUSB software program.
Once you have started up the AnyplaceUSB software program, you will see the main
window as shown below.
