20
Reset Device
The “Reset Device” button resets your USB server device when you need to. Under
the web console interface, select “Reset Device” to reset your AnyplaceUSB-S4 USB
server device, after you click “Reset Device”, if you find “Windows Security” message,
you needs to key-in user name and password then click “OK” to into “Reset Device”
control panel, the default user name and password of USB server device are “
admin
”
(the default user name and password are same).
After click “Reset Device”, you can find “Server Information”, “Restore Factory
Defaults”, “Reboot device” messages and two control button (“Reset to Defaults” and
“Reboot”).
The “
Restore to Defaults
” control button restores the firmware to factory defaults.
