9
w w w . c o o l a z o n e . c o m
Care and Cleaning
mAINTENANCE:
To inspect the sump tank:
disconnect the power cord, drain the sump tank, and remove
the cooling pads. Debris will collect in the sump tank over time. Remove any debris with a
clear cloth or shop vacuum.
To access the cooling pads for inspection and cleaning,
remove the metal flap at the top
back of the fan. Begin by tilting out the center pad from the top while lifting it out of the
drain trough. To remove the two sides, pads, first pull them toward the middle of the unit
until they pass the side retainer. Then continue with the same procedure used to remove
the center pad.
An inlet strainer is located on the bottom of the pump and should be inspected and
cleaned periodically.
Cleaning the Cooling Pads
Please make sure the electric power is turned off and cord disconnected from the outlet.
Removing the cooling pads:
After using the unit for a period of time, the pads should be removed for cleaning. Use
clean water and a brush if necessary to clean the cooling pads. Do not use any soap or
detergent to clean the pads.
