OPS-FRM-05.3 Infinity Grill Instruction Manual Revised: 2022-04-13
14
Southern Stainless Pty Ltd - Artisans in Metal - Uncontrolled when printed
OPERATING INSTRUCTIONS
Control functions
Before lighting the barbecue:
•
Check all hoses and gas fittings are tight.
•
Open the lid.
NOTE: The lid is designed as a cover for aesthetic appeal only. The lid is not designed to
be used as a cooking hood.
•
Ensure the control knobs are in the
OFF
position.
•
Ensure the cooking surfaces are clean.
•
Turn the gas isolation valve
ON.
Lighting instructions
•
Do not attempt to light the burners while the cooking surfaces covered.
•
Read these instructions before lighting.
•
Prior to lighting, check that the disposable fat tray has been cleaned or replaced. Apply
a thin layer of fat trap absorbent to the base of the disposable tray. The tray must be
installed in the appliance prior to use.
•
To light the burner, depress the knob
and rotate anti-clockwise to the
HIGH
position and at the same time depress
the ignitor.
•
Continue depressing the control knob
for 10 seconds to allow the burner to
warm the thermocouple.
•
Release the control knob and adjust
the flame to the desired setting.
•
If the burner does not light, turn the
control knob to the
OFF
position and
wait 30 seconds for the gas to
disperse.
Repeat
the
lighting
procedure.
•
Repeat the lighting procedure for the
opposite burner.
