Convotherm ConvoVent 4+, Operating And Installtion Instructions

Page: 21 / 68

2 For your safety
ConvoVent 4 / ConvoVent 4+ 21
2.4 Additional hazards and safety precautions
Moving and setting up the appliance
When moving and setting up the combi steamer, be aware of the following hazards and take the spe-
cified preventive actions:
Danger Where or in what situations does the
hazard arise? Preventive action / Safety device
Risk of electric shock from
live parts When replacing the ventilation port
behind the left side panel of the combi
steamer.

Work on the electrical system must only
be performed by qualified electricians
from an authorized service company

Professional working
Before removing the covers:

Switch off all connections to the power
supply

Take protective measures at every
power switch to ensure that the power
cannot be switched on again.

Make sure that the appliance is
de-energized
A risk of electric shock from
damaged power cable On the appliance rear Check the power cable
Risk of injury from over-
stressing your body When setting up and moving the hood Only with enough people or appropriate
tools
Risk of crushing from hood
falling down If installation was carried out incorrectly

Secure in place

Use the parts intended for this purpose

Wear personal protective equipment

Exercise caution when performing this
action
Safety device:

Securing with fixing screws
When moving the appliance (within the
site)

Always use appropriate equipment

Secure appliance against tipping over

Exercise caution when performing this
action

Avoid moving appliance along uneven
routes or up or down steep slopes.
Risk of crushing from the
combined units falling over When fitting a hood to a combi steamer

Check that the combined units cannot
tip over

Ensure that they are fitted on a hori-
zontal and flat surface
Danger of hitting the
overhanging hood In front of the appliance door Exercise caution
Safety device:

Adapter for 6.10/6.20
Risk of hands and fingers
being pinched

When placing the hood in position

When fitting the filters

When fitting the adapter

Exercise caution when performing this
action

Wear personal protective equipment

Follow the instructions in the manual
for installation
Risk of cuts When breaking out the perforation

Exercise caution when performing this
action

Wear personal protective equipment

Follow the instructions in the manual
when removing perforated sections,
and deburr the section edges